"Magnetic Water Conditioning" does not add anything to the water or take anything out!
Magnetic Water Conditioning by Magna Clean Systems, Inc., Inc.
MCS Magnetic Fluid Conditioners
The Effects On Water
*Imparts a charge to the water as it passes through the magnetic field
*Causes calcium to be retained in solution rather than plating on surfaces
*Reduces the odor and taste of sulfur in most cases
*Does not add anything to the water or take anything out
*Eliminates scale buildup "A note about Iron"
(A New Window Will Open)
*Reduce the amount of chemicals needed in pools and spas
*WILL SAVE TIME, MONEY AND EFFORT IN MAINTAINING EQUIPMENT
*Read the U.S. Department of Energy Technology Alert # DOE/EE-0162
How Does MCS Work…?
Magnetic Water Treatment units are based upon Faraday's Law of Induction. When water passes through a sufficiently strong and properly configured magnetic field an electron excitation occurs in water, causing naturally occurring crystals in the fluid to precipitate out in a low density snowflake-like form (Aragonite) rather than the hard crystal lime- stone (Calcite) form normally associated with scale in pipes and heat exchangers.
Why do I need multiple units?
There are many factors that are critical to the performance of magnetic water treatment products.
One factor is energy imparted to the water. MCS uses the most powerful ceramic magnets available. They focus their energy
into the pipe which creates a long field for the water to pass through. This power, coupled with longer contact time
of the water to the magnetic energy, equates to the most effective product available.
Why do I need to install a unit on my water heater output?
The heating process dimenishes magnetic conditioning somewhat and the hot water needs to be boosted in order
to get the best results on the hot water outlets.
Will the product remove the minerals from the water?
No. The minerals that are in the water are good for your health. The problem is that they are bad for your plumbing
MCS products will keep the minerals in solution so that they do not accumulate in your plumbing
Or on your water heater element. Click Here for a note about "Iron"
(A New Window Will Open)
Will my water test for less hardness after magnetic conditioning?
Test will show the same hardness level as before because magnetics will not remove the hardwater particles but keeps the minerals in solution so that they do not accumulate in your plumbing.
How will the MCS system save me money?
The U.S. Bureau of Standards reports that just 3/8" of scale build-up requires 55% more energy.
That means an additional $247 more a year for that same hot water.
I have a water softner. Can the MCS System be of any benefit to me?
Absolutely! Install the MCS System on the water line before your softener and it will improve
the efficiency of your softener by 40% to 60%. This could save hundreds of dollars per year
in water cost to back-flush, in addition to the cost of salt. You will not be adding as much sodium to
your water or dumping sodium laden water into the waste water system. Thereby doing your part to help conserve the environment.
Celebrating Our 20th Year In Business!
Sales Reps Needed In All Areas!
Call for Details!
Microscopic photo of
untreated water with
hardness of 140 ppm,
Treated with Model
512 System: Same water
after treatment with
MCS Model 512 System,
Typical scale and
caused by untreated
The affect of magnet-
ically treated water
on the same section of
pipe a short time after
After continual treatment,
most scale is removed and
will be prevented as long
as the system is in operation.