MCS Water Conditioners clamp on the outside of existing water pipes!
Magnetic Water Conditioning by Magna Clean Systems, Inc., Inc.
Frequently Asked Questions
MCS units use a series of strong magnetic fields in a computer designed
configuration that causes an electron excitation to occur in the water. This
causes calcium crystals to precipitate out in a low density "snowflake-like"
form rather than the hard crystal "limestone-like" form that normally occurs
in pipes and heat exchangers and other surfaces.
What Are The Effects On Water?
*Imparts a charge to the water as it passes through the magnetic field
*Causes calcium to be retained in solution rather than plating on surfaces
*Reduces the odor and taste of sulfur in most cases
*Does not add anything to the water or take anything out
*Will enhance the operation and efficiency of water softners
*Eliminates scale buildup
*Reduce the amount of chemicals needed in pools and spas
*WILL SAVE TIME, MONEY AND EFFORT IN MAINTAINING EQUIPMENT
Will my water test for less hardness after magnetic conditioning?
Test will show the same hardness level as before because magnetics will not remove the hardwater particles but keeps the minerals in solution so that they do not accumulate in your
Why Should I use MCS…?
Scale and corrosion is a major challenge facing home owners, business and industry today. The heat-inhibiting problem of scale build-up costs billions of dollars each year. Chemical treatment is both expensive and environmentally questionable. Corrosion, algae and bacteria compound the problem. MCS units can help.
MCS inhibits scale build-up in new pipes and, over time, removes scale from existing pipes, boilers, ice machines and other water using equipment.
How Does MCS Work…?
Magnetic Water Treatment units are based upon Faraday's Law of Induction. When water passes through a sufficiently strong and properly configured magnetic field an electron excitation occurs in water, causing naturally occurring crystals in the fluid to precipitate out in a low density snowflake-like form (Aragonite) rather than the hard crystal lime- stone (Calcite) form normally associated with scale in pipes and heat exchangers.
Why do I need multiple units?
There are many factors that are critical to the performance of magnetic water treatment products.
One factor is energy imparted to the water. MCS uses powerful ceramic magnets. They focus their energy
into the pipe which creates a long field for the water to pass through. This power, coupled with longer contact time
of the water to the magnetic energy, equates to the most effective product available.
Why do I need to install a unit on my water heater output?
The heating process dimenishes magnetic conditioning somewhat and the hot water needs to be boosted in order
to get the best results on the hot water pipes outlets.
Can I install the units on corrugated water heater output lines?
Yes. Corrugated, PVC, Copper and plastic pipes are OK. Galvanized pipe should be avoided.
Will the heat from the water heater damage the units?
No. The MCS units can handle temperatures up to 300 degrees F indefinitely.
Will the product remove the minerals from the water?
No. The minerals that are in the water are good for your health. The problem is that they are bad for your
MCS products will keep the minerals in solution so that they do not accumulate in your
Or on your water heater element.
How will the MCS system save me money?
The U.S. Bureau of Standards reports that just 3/8" of scale build-up requires 55% more energy.
That means an additional $247 more a year for that same hot water.
I have a water softner. Can the MCS System be of any benefit to me?
Absolutely! Install the MCS System on the water line before your softener and it will improve
the efficiency of your softener by 40% to 60%. This could save hundreds of dollars per year
in water cost to back-flush, in addition to the cost of salt. You will not be adding as much sodium to
your water or dumping sodium laden water into the waste water system. Thereby doing your part to help conserve the environment.
What About The Cost…?
The initial cost of the MCS system is less than 1/2 of most water softeners and since there is no additional cost for energy, maintenance or chemicals the system will soon pay for it self.
Can I Install Them Myself...?
Yes. You can install them. It's simple! See installation instructions.
Five reasons to choose MCS Magnetic Conditioners:
1. Contact time
The amount of time water is in contact with the magnetic field as it runs through a pipe is called "contact time." The amount of contact time is indicated by the length of pipe that is exposed to the magnetic field. The more contact time, the more effective the conditioning. Some magnetic water conditioners give the water only a half-inch of contact time. With MCS there is eleven inches of contact time on the
incoming water line. That's a major difference.
The focus of the energy field is another essential factor. A magnetic water conditioning unit must be focused properly on the water that runs through the pipe. MCS uses a configuration that causes an electron excitation to occur in the water.
3. The Magnet's Strength
All MCS magnetic water conditioning products are made with ceramic magnets. Ceramic magnets are the only material known to man to hold a permanent magnetic charge throughout a human's lifetime. In 125 years, these lose less than 3 percent of their power.
4. FREE Shipping
5. LIFETIME Warranty
Celebrating Our 20th Year In Business!
Sales Reps Needed In All Areas!
Call for Details!